Special diesel fuel for agro-industrial sector
Complex Agro - is an additive for diesel fuel used for refueling of large agricultural machinery. Specialized diesel fuel exceeds EURO-5 standards. Complex Agro passes independent laboratory tests and extends the service life of the internal combustion engine in any operating conditions of the equipment.
What does Complex Agro do?
Saves fuel up to 8%by increasing the power and cleaning the injectors, which make the fuel injection into the combustion chamber more complete and finely dispersed
Resource extensionimproved fuel lubricity by 30%, which softens the operation of the fuel pump and protects the COMMON RAIL nozzle from wear
Protectionprotection of the fuel system from corrosion and deposits, cuts off the condensate, forms a film on the rubbing mechanisms of injectors and fuel injection pumps
Cleannessremoval of deposits on the injectors and the entire fuel line and protection from new appearance
Powerincrease in power by up to 13% due to an increase in the cetane number of fuel
*Does not change the frost resistance of winter diesel fuel, does not treat the performance of diesel fuel: sulfur, flash, fractional composition, etc.
Results of using the additive on different fuel bases
| Fuel | Dosage | Diameter of the wear spot | Cetane number |
| Rosneft Diesel fuel K-5 | 421 | 52,9 | |
| Rosneft Diesel fuel K-5+ Complex Agro | 2000 ppm | 407 | 58,2 |
| Gazpromneft Diesel fuel K-5 | 450 | 52 | |
| Gazpromneft Diesel fuel K-5+ Complex Agro | 2000 ppm | 409 | 58 |
*Dosage rate 2 liters of additives on 1000 liters of fuel
Method of application of Complex Agro
1
The volume of the additive is calculated and measured, 2 liters of additive per 1,000 liters of DT
2
An additive is added to the storage tank:
- if the level is higher than the dead residue, the additive is added before the fuel is drained.
- if at the level of the "dead residue", then first half of the volume of the tanker is drained, after which the additive is added.
3
The fuel is drained into the container, at this moment the additive is mixed and ready for use
Mixing the additive in the field
1
The additive is measured in the proportion of 1 liter per 500 liters of diesel
2
An additive is added to the tank before refueling
3
During the filling of the tank, the additive is completely mixed and ready for use
The difference between conventional and specialized fuel is noticeable from the first refueling, and you will appreciate it.
