Concentrated markers for petroleum products - protect your fuel from theft
Increasing of sales
Protection against forgery and in quality proceedings
Gaining consumer confidence
Universal for all petroleum products
Theft prevention
*Does not change the properties of the fuel and does not leave carbon deposits in the engine.
For whom?
1
Bunkering companies, fleets, farms, motor transport companies, mining enterprises, and coal mines
- Protection from theft.
2
Petrol station, Oil refineries, Petroleum warehouses
- Creation of branded fuel.
- Bringing the fuel to the desired commercial color and shade.
Differences from competitors
Left 30gr/ton of normal dye, Right 3gr/ton of Sunshine dye
How the dye is supplied
Application method
Before entering into the storage tank, the dye must be dissolved in a small volume of 10-20 liters of fuel, then poured into the storage tank and mixed in a closed loop using pumps.
The dosages of the dyes differ. Some paint the fuel with a saturated color, others with a paler one.
The concentrations shown below are: 1 g/t, 3 g/t, 5 g/t, 10 g/t, 20 g/t (from left to right, respectively).
The dosages of the dyes differ. Some paint the fuel with a saturated color, others with a paler one.
- 5 g per ton – average dosage
- 3 g per ton – minimum
The concentrations shown below are: 1 g/t, 3 g/t, 5 g/t, 10 g/t, 20 g/t (from left to right, respectively).
Аquamarine (blue)
Red Army (red)
Malachite (green)
Sunshine (yellow)